3Com BR-6574N manual Wlan MAC

	54Mbps for 802.11g clients).
	2.4 GHz (G): 2.4GHz band, only allows
	802.11g wireless network client to connect this
	router (maximum transfer rate 54Mbps).
	2.4 GHz (B+G+N): 2.4GHz Band, Allows
	802.11b, 802.11g, and 802.11N wireless clients.
	It’s recommends to select this band to maximize
	compatibility.
ESSID	This is the name of broadband router. You can
	type any alphanumerical characters here,
	maximum 32 characters. ESSID is used to
	identify your own broadband router from
	others when there are other broadband routers
	in the same area. Default SSID is ‘default’, it’s
	recommended to change default ESSID value
	to the one which is meaningful to you, like
	myhome, office_room1, etc.
Site Survey	Click ‘Select Site Survey’ and a popup window
	will appear. All reachable wireless access
	points will be shown in the window. Select the
	wireless access point you wish to connect from
	the list, and click ‘Done’. If the wireless access
	point you wish to connect is not listed, you can
	click ‘Refresh’ to rescan.
	If you still can’t find the wireless access point
	you wish to connect, please move the
	broadband router to the place nearer to the
	access point you wish to connect.
WLAN MAC	Some wireless access points will only allow
	clients with certain MAC address to
	establish connection. In this case, you can
	input the MAC address that will be accepted
	by the wireless access point you wish to
	connect here. You can also click ‘Clone
	MAC’ button to use the MAC address of your