| computer (the one you used to connect to the |
| web management interface currently). |
Auto MAC Clone | If you wish to use the MAC address of wired |
| LAN interface of this broadband router, |
| select ‘Enable’, or select ‘Disable’ to not to |
| use the MAC address of the wired LAN |
| interface of this broadband router. |
When you finished with the settings in this page, you can click ‘Apply’ button to save changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click ‘Apply’ button, you’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this requires about 30 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband router and continue on other settings later.
You can click ‘Continue’ to continue on other settings without restart the broadband router, however, the changes you made will not take effect before you restart the broadband router.
