3Com BR-6574N manual Connect this router maximum transfer rate

3-4-1-4 AP Bridge-Point to Multi-Point

In this mode, you can use this broadband router as a wireless network bridge and let all computers connected to the LAN ports of all wireless access points to communicate with each other. This mode supports up to four wireless access point peers.

Please note that when you select this mode, this broadband router will act as wireless bridge only, and will not accept other wireless clients.

Also, you can connect to the wireless access point with the same functionality only. If you wish to connect to the wireless access points made by other manufacturer, please select ‘AP Bridge-WDS’ mode if the wireless access point you wish to connect supports WDS.

Here are descriptions of every setup items:

Item Name	Description
Band	Please select the radio band from one of
	following options (must be the same with the
	wireless access point you wish to connect):
	2.4 GHz (B): 2.4GHz band, only allows
	802.11b wireless network client to connect this
	router (maximum transfer rate 11Mbps).
	2.4 GHz (N): 2.4GHz band, only allows
	802.11n wireless network client to connect this
	router (maximum transfer rate 300Mbps).
	2.4 GHz (B+G): 2.4GHz band, only allows
	802.11b and 802.11g wireless network client to
	connect this router (maximum transfer rate
	11Mbps for 802.11b clients, and maximum
	54Mbps for 802.11g clients).
	2.4 GHz (G): 2.4GHz band, only allows
	802.11g wireless network client to connect this