3Com BR-6574N manual Number that will be affected by this rule. If you

	number that will be affected by this rule. If you
	want to apply this rule on port 80 to 90, please
	input ’80-90’; if you want to apply this rule on
	a single port, just input the port number, like
	‘80’
Remote IP Address	Specify the remote (destination) IP address that
	will be affected by this rule. Please input the
	starting IP address in the left field, and input
	the end IP address in the right field to define a
	range of IP addresses, or just input the IP
	address in the left field to define a single IP
	address.
Remote Port Range	Please input the range of remote (destination)
	port number that will be affected by this rule. If
	you want to apply this rule on port 80 to 90,
	please input ’80-90’; if you want to apply this
	rule on a single port, just input the port
	number, like ‘80’. If the remote (destination) IP
	address and /or port number is universal, just
	leave it blank.
Traffic Type	Please select the traffic type of this rule,
	available options are None, SMTP, HTTP,
	POP3, and FTP. You can select a specific
	traffic type for this rule, if you want to make
	this rule as a IP address based rule (apply the
	limitation on all traffics from / to the specified
	IP address / port number), select ‘None’.
Protocol	Please select the protocol type of this rule,
	available options are TCP and UDP. If you
	don’t know what protocol your application
	uses, please try ‘TCP’ first, and switch to
	‘UDP’ if this rule doesn’t seems to work.

Please click ‘save’ button to save settings, and the rule you just set will appear in current QoS table; if you did anything wrong, you’ll get an error message when you click ‘Save’ button, please correct your input by the instructions given by the error message. If you want to erase all values you just entered, click ‘Reset’.