Accessing the Wizard 35
Do not enter anything in this box if your ISP does not require a service name.
4Enter the MTU value supplied by your ISP in the MTU text box. If your ISP has not supplied an MTU value, leave this at the default value. The default is 1454.
5Select an idle time from the Maximum Idle Time drop down list. This is the amount of time without Internet activity that you want to allow before the Router ends the PPPoE session.
6Check all of your settings, and then click Next. Dynamic IP Address Mode
To setup the Router for use with a dynamic IP address connection:
1Select the ISP provides configuration dynamically (via DHCP) and then click Next.
Figure 18 Hostname Screen
2Some ISPs require a host name. If your ISP has this requirement, enter the host name in the Host Name text box (Figure 18) and click Next. The Clone MAC Address screen displays.
