Advanced 81
| The upgrade procedure can take up to two minutes, and is complete |
| when the Alert LED has stopped flashing and is permanently off. Make |
| sure that you do not interrupt power to the Router during the upgrade |
| procedure; if you do, the software may be corrupted and the Router may |
| not start up properly afterwards. . |
|
|
Advanced | Selecting Advanced from the main menu displays the following five tabs |
| in your Web browser window: Static Route, RIP, Security!and!Syslog. |
Static Route The Router supports static route functionality. Select the Static Route tab to display the screen/
Static Route screen
The following information is displayed for each static route:
■Index - the index of the static route
■Network Address - the network address of the route. If network address and subnet mask are both set to 0.0.0.0, this is the default route.
■Subnet Mask - the subnet mask of the route. If network address and subnet mask are both set to 0.0.0.0, this is the default route.
■Gateway - the gateway used to route data to the network specified by the network address.
