Manuals / 3Com / Computer Equipment / Network Router

3Com WL-537S manual Forgotten Password, Reset to, Factory Defaults, Networking

Models: WL-537 WL-537S

1 128
Download 128 pages 40.92 Kb
Page 91
Image 91

Forgotten Password and Reset to Factory Defaults 105

Forgotten Password

If you can browse to the Router configuration screen but cannot log on

and Reset to

because you do not know or have forgotten the password, follow the

Factory Defaults

steps below to reset the Router to it’s factory default configuration.

 

CAUTION: All your configuration changes will be lost, and you will need

 

to run the configuration wizard again before you can re-establish your

 

Router connection to the Internet. Also, other computer users will lose

 

their network connections whilst this process is taking place, so choose a

 

time when this would be convenient.

1

Remove power from the Router.

2

Disconnect all your computers and the cable/DSL modem from the

 

Router.

3

Using a straight through Ethernet cable, connect the Ethernet Cable/DSL

 

port on the rear of the Router to any one of the LAN ports.

4

Re-apply power to the Router. The Alert LED will flash as the Router starts

 

up, and after approximately 30 seconds will start to flash more slowly

 

(typically 2 seconds on, 2 seconds off). Once the Alert LED has started to

 

flash slowly, remove power from the Router.

5

Remove the cable connecting the Cable/DSL port to the LAN port, and

 

reconnect one of your computers to one of the Router LAN ports.

6

Re-apply power to the Router, and when the start-up sequence has

 

completed, browse to:

 

http://192.168.1.1

 

and run the configuration wizard. You may need to restart your computer

 

before you attempt this.

7

When the configuration wizard has completed, you may reconnect your

 

network as it was before.

 

 

Wireless

■ Ensure that you have an 802.11b or 802.11g wireless adapter for

Networking

each wireless computer, and that it is correctly installed and

 

configured. Verify that each Wireless computer has either Windows

 

95 or higher or MAC OS 8.5 or higher.

■ Verify that your wireless computers are configured to work in Infrastructure mode and not Ad Hoc mode. The Router contains an Access Point that is designed to operate in Infrastructure mode. Ad Hoc mode is not supported by the Router.

Page 90 Page 92
Page 91
Image 91
3Com WL-537S manual Forgotten Password, Reset to, Factory Defaults, Networking
Page 90 Page 92

WL-537, WL-537S specifications

The 3Com WL-537S and WL-537 are advanced wireless access points designed to enhance networking capabilities in both enterprise and residential settings. These models are part of 3Com's effort to provide reliable connectivity, improved performance, and robust security.

The WL-537S is particularly notable for its versatility and extended range. It supports both 2.4 GHz and 5 GHz frequencies, allowing users to choose between a wider range or higher speed depending on their needs. With 802.11n technology, it offers significant improvements in data rates and reach compared to earlier standards. This dual-band functionality enables users to run multiple applications simultaneously without sacrificing performance. The access point can handle higher traffic volumes efficiently, making it ideal for environments with many users.

One of the standout features of the WL-537S is its integrated Power over Ethernet (PoE) capability, which simplifies installation by allowing the device to receive power and data over a single Ethernet cable. This is particularly useful in locations where power outlets are limited or hard to reach. Additionally, the access point’s lightweight, compact design allows for easy mounting on ceilings or walls, providing versatility in deployment.

Both models offer advanced security mechanisms, essential for protecting sensitive information in a network. They come equipped with multiple encryption protocols, including WPA2 and WPA3, ensuring that data transmission remains secure. Moreover, with features like Remote Authentication Dial-In User Service (RADIUS) support and VLAN tagging, organizations can implement fine-grained control over user access and data traffic.

Additionally, the WL-537 and WL-537S support several network management features, including a web-based interface for easy configuration and monitoring. This feature is particularly useful for IT administrators who need to manage settings remotely or troubleshoot issues.

Dynamic load balancing is another key characteristic of these access points. By distributing the network load evenly among connected devices, the WL-537S and WL-537 ensure that no single device gets overwhelmed, thus maintaining optimal performance across the network.

In conclusion, the 3Com WL-537S and WL-537 access points combine robust technology, security features, and flexibility to meet the demands of modern networking. With their dual-band capabilities, PoE integration, and management features, they provide an ideal solution for users looking to enhance their wireless network experience.