LAN Settings 67
Heart Beat Signal
Check with your ISP to make sure they support Heart Beat Signal.
To set up the Router for use with a Heart Beat Signal connection, use the following procedure:
1Select Heart Beat Signal (For Australia only) in the IP Allocation Mode field.
2Enter the Host Name(optional).
Some ISPs require a host name. If your ISP has this requirement, enter the host name in the Host Name text box.
3Enter your Heart Beat Signal user name in the Heart Beat Signal User Name text box.
4Enter your Heart Beat Signal password in the Heart Beat Signal Password text box.
5Enter the MTU value supplied by your ISP. If you do not know this, leave it at the default value. The default is 1440.
6Select an idle time from the Maximum Idle Time
This value will correspond to the amount of idle time(no Internet activity)! that will pass before the Router automatically ends your PPTP session.
