Manuals / 3Com / Computer Equipment / Network Router

3Com WL-537S manual Power LED or, Power Adapter OK, LED Not Lit

Models: WL-537 WL-537S

1 128
Download 128 pages 40.92 Kb
Page 93
Image 93

Power LED or Power Adapter OK LED Not Lit 107

■ Speed of connection: The 802.11b and 802.11g standards will

 

automatically choose the best speed depending on the quality of your

 

connection. As the signal quality weakens then the speed falls back to

 

a lower speed. The speeds supported by 802.11g are 54 Mbps,

 

48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, and 6 Mbps. The

 

speeds supported by 802.11b are 11 Mbps, 5.5 Mbps, 2 Mbps and

 

1 Mbps. In general the closer you are to the Router the better the

 

speed. If you are not achieving the speed you had anticipated then try

 

moving the antenna on the Router or moving the Wireless computer

 

closer to the Router. In an ideal network the Router should be located

 

in the centre of the network with Wireless computers distributed

 

around it. Applications are generally available with the computer

 

wireless card to carry out a site survey. Use this application to find the

 

optimal siting for your wireless computer. Consult your Computer

 

Card documentation and vendor for more details.

 

 

Power LED or

■ Check that your Router is receiving power by looking at the status of

Power Adapter OK

the Power LED on the front panel and the Power Adapter OK LED on

LED Not Lit

the rear panel:

 

■ If both LEDs are lit green then the unit is receiving power.

 

■ If both LEDs are unlit then no power is being supplied to the unit.

 

Check that the power adapter is plugged into a working mains

 

outlet and that the mains outlet is supplying power. If the mains

 

socket is supplying power then the power adapter or power

 

adapter connection may be faulty. See “Replacement Power

 

Adapters” below.

 

■ If the Power Adapter OK LED is lit but the Power LED is unlit then

 

there may be a fault with your unit. Contact 3Com Technical

 

Support.

 

■ Check that you are using the correct power adapter for your Router.

 

You should only use the power adapter supplied with your Router.

Replacement Power If both the Power Adapter OK LED and Power LED are off, check your Adapters power adapter connection. If the mains outlet is working and is capable

of supplying power to other devices, contact 3Com Technical Support and ask for a replacement power adapter. Please quote the power adapter part number shown on the OfficeConnect power adapter you are using.

Page 92 Page 94
Page 93
Image 93
3Com WL-537S manual Power LED or, Power Adapter OK, LED Not Lit
Page 92 Page 94

WL-537, WL-537S specifications

The 3Com WL-537S and WL-537 are advanced wireless access points designed to enhance networking capabilities in both enterprise and residential settings. These models are part of 3Com's effort to provide reliable connectivity, improved performance, and robust security.

The WL-537S is particularly notable for its versatility and extended range. It supports both 2.4 GHz and 5 GHz frequencies, allowing users to choose between a wider range or higher speed depending on their needs. With 802.11n technology, it offers significant improvements in data rates and reach compared to earlier standards. This dual-band functionality enables users to run multiple applications simultaneously without sacrificing performance. The access point can handle higher traffic volumes efficiently, making it ideal for environments with many users.

One of the standout features of the WL-537S is its integrated Power over Ethernet (PoE) capability, which simplifies installation by allowing the device to receive power and data over a single Ethernet cable. This is particularly useful in locations where power outlets are limited or hard to reach. Additionally, the access point’s lightweight, compact design allows for easy mounting on ceilings or walls, providing versatility in deployment.

Both models offer advanced security mechanisms, essential for protecting sensitive information in a network. They come equipped with multiple encryption protocols, including WPA2 and WPA3, ensuring that data transmission remains secure. Moreover, with features like Remote Authentication Dial-In User Service (RADIUS) support and VLAN tagging, organizations can implement fine-grained control over user access and data traffic.

Additionally, the WL-537 and WL-537S support several network management features, including a web-based interface for easy configuration and monitoring. This feature is particularly useful for IT administrators who need to manage settings remotely or troubleshoot issues.

Dynamic load balancing is another key characteristic of these access points. By distributing the network load evenly among connected devices, the WL-537S and WL-537 ensure that no single device gets overwhelmed, thus maintaining optimal performance across the network.

In conclusion, the 3Com WL-537S and WL-537 access points combine robust technology, security features, and flexibility to meet the demands of modern networking. With their dual-band capabilities, PoE integration, and management features, they provide an ideal solution for users looking to enhance their wireless network experience.