3Com X3 owner manual Dual-Zone Shock Sensor, Manual Arming Lock, Automatic Arming

Owners Manual (Continued)

Button Function:

	Transmitter Button	Action	System Function / Remark
		Press and Release	Arm/Lock Doors
		Press Twice	Arm/Lock Doors + Delete Shock Sensor (2nd Long Beep)
		Press and Release	Progressive Car Finder (Functions 30 Seconds After Armed)
		Press and Release	Disarm/Un-Lock Doors
		Press and Hold for 1.5 Seconds	Channel 3 Activation (Release Trunk as Default)
+		Press Both Buttons Together	Silent Arm/Disarm (Ignition Key is Off)
		Press and Hold Both Buttons	Activate Car-Jacking (Ignition Key Must be On)
		for 1 Second
		Press and Hold for 3 Seconds	Press and Hold for Panic Mode On
			Press and Release for Panic Mode Off

Press and Release

Activate 2nd System operation

C. Dual-Zone Shock Sensor

1.Light impacts to the vehicle will cause a pre-warning (warn-away) chirp from the siren or horn. These light impacts will not set the alarm into full trigger even if they are repetitive.

2.Hard impacts to the vehicle will bypass the pre-warning indicator and activate a full alarm trigger.

D.Manual Arming “Lock”

1.Press the “Lock” button on the transmitter.

2.The siren will chirp once and the parking light will flash once indicating that the system is now armed. The vehicle’s doors will lock upon arming if door lock control has been installed.

Silent Arming/Disarming: Press the “Lock” and “Unlock” button together on the transmitter to arm or disarm you security system. No chirp sound will be heard, arm/disarm confirmation will be through the vehicles parking lights only.

E. Automatic Arming

This X3 security system is equipped with an optional Automatic Arming feature, which allows the security system to arm 30 seconds after the last door is closed.

Operation:

1.Turn the ignition to the “Off” position and exit the vehicle.

2.After all entrances are closed the security system’s LED will flash fast for 30 seconds. If you reopen any protected entrance, the security system LED will stop flashing. It will begin flashing again once all the protected vehicle’s entrances are closed.

3.After the 30-second timer has elapsed, the security system will automatically “Arm”. The siren will chirp one time and the parking lights will flash one time.

Passive Door Locking: If the “Automatic Arming with Door Locks” feature has been programmed on, The vehicle doors will automatically lock after the automatic arming cycle has been completed. (see Feature No. 2 on programming chart)

10