Programming Speed Dialing Codes (Continued)
Using # as a Character
If you want to use a “ # " as an actual character, you must place two “ # ”s in the programmed number.
For example, you may want to program
1.5second pause, a “ # “, and 7777 into a Personal Speed Dialing code.
You program: 5551111* # # 7777
This means: 5551111 (1.5 second pause) #7777
Using # with Speed Dialing Codes
When you want to have a Speed Dialing code as part of your programmed number, you should use a single “ # ” for the code.
For example, you may want to program the System Speed Dialing code “ # 100” into a Personal Speed Dialing code.
You program: #100
This means: System Speed Dialing code # 100
Using #8 to Start End-to-End Signaling
When you place a “ #8” in a programmed number, you tell the system to start
For example, you may want to program both a telephone number (to be dialed first), and an identification code (that should be transmitted to the far end).
You program: 9*5554444** # 812345
This means: 9 (1.5 second pause) 5554444 (3 second pause)
(start
(Continued)
23
