5.If it is necessary to add or remove conveyor links to achieve the correct tension, OR if it is necessary to reverse the conveyor belt for correct orientation, the belt will need to be removed from the conveyor frame. If this is necessary, perform the following procedure:

Remove the conveyor assembly from the oven and place it flat on the floor.

Remove the master links using long-nose pliers. Then, roll up the belt along the length of the conveyor frame.

Add or remove belt links as necessary to achieve the correct belt tension.

Replace the belt on the conveyor frame. Check that the conveyor belt links are oriented as shown in Figure 2-15, and that the smooth side of the conveyor belt faces UP.

Connect the inside master links. Check that the links are oriented as shown in Figure 2-15.

Connect the outside master links. Note that the outside master links each have an open hook on one side. This hook aligns with the hooks along the sides of the other conveyor links. See Figure 2-15.

Replace the conveyor into the oven.

Figure 2-15. Conveyor and Master Link orientation

Direction

CORRECT

of travel

master link

 

 

position

Incorrect master link position

E.Final Assembly

1.Install the crumb trays underneath the conveyor as shown in Figure 2-16.

Figure 2-16. Crumb Trays

Crumb tray

insertion

CONVEYOR BELT REVERSAL

Conveyor belt reversal consists of three steps:

1.Physically reversing the conveyor belt.

2.Resetting direction jumper on the conveyor control board.

3.Switching the photo detector.

REVERSING THE CONVEYOR BELT

Remove the conveyor from the oven and find the master link location. Remove master links and remove the belt from the conveyor frame. Reassemble the belt back onto the frame (in the reverse direction) and reinstall the master links. Replace the conveyor assembly in the oven.

RESETTING DIRECTION JUMPER

Locate Jumper P1 on the conveyor control board. Move jumper from terminals 1 and 2, and replace onto terminals 2 and 3.

CAUTION: Shock hazard in compartments electrical filters are electrically alive.

SWITCHING PHOTO DETECTOR

CAUTION: Disconnect Power Before Switching Photo eye.

Remove the three screws securing the access door to the unit. Open the access door and disconnect the connector fitting to the photo eye assembly. Remove the two screws securing the photo eye assembly to the control box. Remove the four nuts securing the photo eye to the housing. Rotate the photo eye 180 degrees and resecure the photo eye with the four nuts.

On the opposite control box, remove the two screws holding the cover where the photo eye assembly will be positioned. Secure the photo eye assembly in position with the two screws. Place the photo eye cover on the opposite control box, where the photo eye assembly was removed, and secure the two screws. Secure the access door with the three screws.

Remove the three screws securing the access door on the opposite side. Open the access door, where the photo eye is now positioned, and connect the photo eye connector fitting. Secure the access door with the three screws.

Apply power to the unit. Adjust the photo eye height by loosen- ing the two screws securing the photo eye assembly and sliding the photo eye assembly either up or down, such that the beam is approximately 1/4 inch above the belt.

Note: This is MUCH easier in reduced light.

Replace all covers.

16

Page 20
Image 20
3G Green Green Globe PS840E Conveyor Belt Reversal, Reversing the Conveyor Belt, Resetting Direction Jumper

PS840E specifications

The 3G Green Green Globe PS840E is a leading-edge tablet that embodies the evolution of mobile technology with a focus on sustainability and eco-friendliness. This device blends impressive features with a commitment to reducing environmental impact, making it an attractive choice for users who prioritize both performance and responsibility.

One of the standout features of the PS840E is its robust processing power. Equipped with a powerful quad-core processor, the tablet ensures smooth multitasking and quick app responsiveness. Whether users are streaming videos, playing games, or working on productivity tasks, the tablet delivers an impressive performance that rivals many higher-end devices.

The display of the PS840E is another highlight. The tablet boasts a vibrant 8-inch HD touchscreen that provides crystal-clear visuals and rich colors. This high-resolution display is perfect for media consumption, whether watching movies, reading e-books, or browsing the internet. The screen is also designed to minimize glare, making it usable in various lighting conditions.

In terms of connectivity, the 3G functionality of the PS840E sets it apart from standard tablets. With built-in 3G support, users can stay connected to the internet on the go, allowing for seamless browsing and social media engagement without relying solely on Wi-Fi. This feature is especially beneficial for those who travel frequently or live in areas with limited internet access.

Battery life is another crucial aspect of the PS840E, designed to keep pace with the modern user's demands. With an impressive battery life, the tablet offers up to 10 hours of usage on a single charge. This longevity ensures that users can enjoy their device throughout the day without the constant need for recharging, making it ideal for both work and leisure.

The Green Globe PS840E also boasts a range of eco-friendly features that highlight its commitment to sustainability. The tablet is constructed using recyclable materials and incorporates energy-efficient technologies that reduce power consumption. This eco-conscious approach not only benefits the environment but also appeals to users who are increasingly aware of their digital footprint.

Additionally, the device runs on an intuitive operating system that offers access to a myriad of applications, enhancing productivity and entertainment. With features such as expandable storage, Bluetooth connectivity, and dual cameras for photography and video calls, the PS840E is a versatile tablet suited to a wide array of needs.

In summary, the 3G Green Green Globe PS840E is a thoughtfully designed tablet that combines advanced technology with sustainable practices. Its exceptional performance, vibrant display, and commitment to eco-friendliness make it an ideal choice for environmentally conscious consumers looking for a reliable and versatile mobile device.