3M™ MicroTouch™ Display C1500SS Installation Guide

19

Clock Setting

If the Clock setting of your image is not fine-tuned, you may observe periodic vertical bars of video noise. These bars of noise are usually adjusted out when an Auto Adjust is performed. If the bars of noise are still present, this setting can be adjusted manually.

Adjust this setting so that the vertical bars of noise are replaced by either an even amount of noise across the whole screen, or the noise disappears completely. Adjusting the Phase Setting can eliminate any remaining noise.

Phase Setting

If you do an Auto Adjust, the display will try to find the best Phase setting. If the phase of your display is not fine-tuned, you may observe unstable horizontal noise lines and cross talking, stretching from the edge of small windows on your display. Adjusting the Phase setting can eliminate this noise.

If you change your display to Windows shut down mode, this noise will be more visible, and easier to eliminate. Click on the "Start" button, and then click Shut Down. This will bring you to the Windows shutdown mode. After finishing phase adjustment, click on "Cancel” to return to your original Windows display.

Sharpness

The Sharpness option can be used to adjust the sharpness of the picture when lower resolutions are being displayed.

Information

This option will display the monitor resolution, H. Freq, V. Freq, and version.

Color Temperature

This option will activate a sub-menu, allowing the operator to adjust the color balance and level for the display. There are three-color presets, plus an option for user settings to be stored.

By adjusting a single color, you can make the picture look warmer (biased towards red) or cooler (biased towards blue). Adjusting all three levels will make colors appear more or less striking.

3M Touch Systems Proprietary Information