3M™ MicroTouch™ Display C1500SS Installation Guide

7

•Plug power cord into a grounded receptacle.

•When unplugging power supply cord, pull on plug not cord.

•Do not connect or disconnect this product during an electrical storm.

•Install the display in a well-ventilated area. Always maintain adequate ventilation to protect the display from overheating and to ensure reliable and continued operation.

•Remember to take into account that the operating temperature of the installation may be greater than the room ambient, and consideration should be given to installing the unit in an environment compatible with the maximum rated ambient temperature.

•When installing the unit, ensure that it does not restrict the flow of air to any other equipment within the installation required for safe operation.

•Do not expose this display to direct sunlight or heat. Passive heat may cause damage to the metal case and other parts.

•Do not install this display in areas where extreme vibrations may be generated. For example, nearby manufacturing equipment may produce strong vibrations. The vibrations may cause the display to exhibit picture discoloration or poor video quality.

•Ensure the metal enclosure does not contact the touch sensor.

•Be sure to gasket display to enclosure properly.

•To avoid ergonomic concerns:

Do not install the display in a manner or location with awkward accessibility. Extended use may result in muscle, tendon, or fixed posture strains. It is recommended you take periodic breaks from continuous use.

Service and Repair Indicators

Do not attempt to service this unit yourself. Removing the display cover may expose you to dangerous voltage or other risks. Unplug the display from the power outlet and refer servicing to qualified service personnel in the event that:

•Liquid is spilled into the product or the product is exposed to rain or water.

•The product does not operate properly when the operating instructions are followed.

•The product has been dropped or the metal case has been damaged.

•The product exhibits a distinct change in performance, indicating a need for service.

•The power cable or plug is damaged or frayed.

3M Touch Systems Support Services

3M Touch Systems, Inc. provides extensive support services through our website and technical support organization. Visit the 3M Touch Systems website at http://www.3Mtouch.com/, where you can download touch sensor software and drivers, obtain regularly updated technical documentation on 3M Touch Systems products, and learn more about our company.

Whenever you contact Technical Support, please provide the following information:

•Touch display size, part number and serial number

•Current driver version

•Operating system used

•Information on additional peripherals

3M Touch Systems Proprietary Information