6

3M™ MicroTouch™ Display C1500SS Installation Guide

WARNING

To avoid the risk of fire which could result in serious injury or death:

•Do not remove the cover or back of the display.

To avoid the risk of electric shock which could result in serious injury or death:

•Do not use a damaged power supply.

•Do not use a power cord that is frayed or otherwise damaged.

CAUTION

To avoid the risk of electric shock which may result in minor or moderate injury:

•Do not service the Flat Panel Display.

•There are no user serviceable parts inside.

•Refer all servicing to qualified service personnel.

•The backlight inverter output is at high voltage.

•Do not use non-conforming replacement parts.

•Do not place wet or damp objects on the display.

•Do not expose the display to rain or other sources of water, steam, or moisture.

•Do not place foreign objects on the display or its cables.

•Do not remove the cover or back of the display.

•Ensure that connecting the unit to the power source will not overload the power source.

To avoid the risk of glass breakage which may result in minor or moderate injury:

•Handle the display with care to avoid breaking the touch sensor. The display contains glass parts. Dropping the display may cause the glass parts to break.

•Ensure mounting screws are tightened fully to prevent instability.

•Ensure that mounting the unit will not adversely affect the stability of the end equipment when installing in free standing equipment or using the VESA mount.

To avoid the potentially hazardous situations associated with the use of isopropyl alcohol which may result in minor or moderate injury or property damage:

Follow all instructions and recommendations in the manufacturer's Material Safety Data Sheet and product label.

To avoid possible environmental contamination which may result in minor or moderate injury:

•The lamp(s) inside this product contain mercury (Hg) and must be recycled or disposed of in accordance with local, state, or federal laws. Check your individual state's requirements to see if specific recycling requirements exist for mercury- containing products or other electronic products. Refer to http://www.nema.org/lamprecycle/ or call 3M Touch Systems 1-866-407-6666 for further information.

•Dispose of the flat panel display according to applicable governmental regulations.

Explanation of Symbols

Attention: Read accompanying documentation

Important Notes

•Plug power cord into appropriate power source.

3M Touch Systems Proprietary Information