3M 2210E manual Introduction, Installing Or Replacing The Batteries, 6LR14 cells 6 LR6 cells

INTRODUCTION

The 3M™ Dynatel™ 2210E Cable Locator consists of a Transmitter and a Receiver for locating buried cables or Active Duct Probes (sondes). It also can be used to identify cables or pairs using a Dyna-Coupler plugged into the Receiver jack. The Transmitter provides two frequencies to accommodate varying factors such as distance, cable type, or soil conditions. The Receiver detects 50 or 60 Hz AC Power signals and low frequency (LF) radio signals re-radiated form local broadcast transmitters. It also measures the signal current in a cable and displays its magnitude. The depth of buried cables or sondes may also be displayed.

Note: For more detailed locating instructions and advanced locating techniques, ask your 3M sales representative for a free publication called Cable and Pipe Locating Techniques.

INSTALLING OR REPLACING THE BATTERIES

6LR14 cells

6 LR6 cells

CAUTION!

Do not connect batteries improperly, charge or dispose of in fire. Batteries may leak or explode and cause personal injury. Always remove batteries when storing the units.

Battery Disposal: Since regulations vary, consult applicable regulations or authorities before disposal.

Page 2