3M 2220M Receiver Battery Installation

 Warning

Potential for electric shock exists when handling connection cables while the

transmitter is ON. Make all connections prior to powering on the unit. Turn the

transmitter OFF before handling connection cables.

 Warning

Voltage greater then 240 volts will damage equipment and could cause personal

injury or death. Make all connections before turning on the transmitter. Follow

standard procedures for reducing the voltage.

Receiver Battery Installation

The.Receiver.displays.the.battery.level.across.the.bottom.of.the.start.up.screen.

when.the.unit.is.powered.on.

Contents

Main Contents Introduction Standard 3M Equipment Packages Optional 3M Dynatel Accessories Quick Start Transmitter Battery Installation Transmitter Overview Receiver Battery Installation Page Transmitter Operations Direct Connection 3M Dynatel Dyna-Coupler Clamp Induction Method Receiver Operations Initial Settings Receiver Setup Page Page Page Pipe and Cable Locating Depth and Current Page Pin-Pointing the Sonde Specications Cleaning Instructions Use.a.soft.damp.cloth.to.clean.the.product.and.test.leads.if.necessary.. CE Compliance Track and Trace Solutions This.product.is.in.accordance.with.the.requirements. of.the.European.directive.99/5/EC.