3M 290 Power Supply Specifications, Power supply, Operating Condition, Units, EMC Compliance

SAFETY INFORMATION

Power Supply Specifications
Power supply	Operating Condition	Units
Voltage Range	100-240	Volts AC
Frequency	50/60	Hertz
Current	1.2	Amps
Environmental Operating Conditions
Environmental Condition	Operating Condition	Units
Altitude	2500 (max)	meters
Operating Temperature	16-43	° C
Relative Humidity	20-80 (non-condensing)	%
Voltage Range	12	Volts DC
Frequency	DC
Current	2.4	Amps
Installation/Over Voltage	Category II
Pollution Degree	2

Health and Safety Information

Device Safety Compliance

The Attest 290 Auto-reader complies with the standard IEC/EN 61010-1 as demonstrated by the CB Scheme Certificate and test report that Underwriters Laboratories Inc. (UL) generated.

The Attest 290 Auto-reader is listed as Laboratory equipment and carries the UL and c-UL marks based on compliance to the standards UL 3101-1 and CSA 22.2 No. 1010-1.92.

The Attest 290 Auto-reader complies with the CE mark related to the Low Voltage Directive 73/23/EEC as confirmed in the Declaration of Conformity.

EMC Compliance

The Attest 290 Auto-reader complies with IEC/EN 61326-1 as confirmed in the Certificate of Compliance generated by 3M.

The Attest 290 Auto-reader complies with the EMC requirements of the CE mark EMC Directive 89/336/EEC.

The Attest 290 Auto-reader complies with the Australian EMC requirements as confirmed in the Supplier’s Declaration of Conformity that is linked to the C-tick mark.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numerique de la classe A respecte toutes les exigences due Reglement sur le materiel brouilleur du Canada.

3M © 2003 78-8078-8977-5 Page 3 of 9 Attest 290 Auto-reader