2
Getting started
Getting Started
Up and Running overview
Getting Started
Up and Running overview
1.Place the QUESTempº 48N in the work area in a safe location approximately 3.5 feet off the ground.
2.Turn the unit On. If the battery voltage displayed during the
3.Be aware that the sensors require 10 minutes to stabilize to a new environment.
4.In the main menu, View will be selected (an indicator arrow denotes the selected menu). Press the I/O Enter key and the measurement screen will appear.
5.Press the Run/Stop key to begin datalogging. Use the Arrow keys to set the display to the desired items.
Placing the QUESTempº 48N on the job site
The QUESTempº 48N should be placed at a height of 3.5 feet (1.1m) for standing individuals or 2 feet (.6m) for seated individuals. Tripod mounting is recommended to get the unit away from anything that might block radiant heat or airflow. A 1/4"x 20 threaded bushing on the bottom of the instrument allows mounting to a standard photographic tripod. Do not stand close to the unit during sampling.
Before data logging, allow ten minutes for the sensors readings to stabilize.
