![](/images/new-backgrounds/1214278/21427831x1.webp)
Resetting the handheld
If the handheld display locks up or stops working, perform the reset procedure described below.
Symptoms may include:
The power will not come on (screen remains blank). Lines appear on the display or the display is distorted.
A blinking black square appears in the upper left corner of the display. The Palm startup screen appears on the display and will not go away.
A blank screen may be caused by a fully discharged battery.
To reset the handheld
1Insert a memory card (with 3M Handheld software on it) into the handheld.
2Press and hold the reset button for approximately one second.
The Preferences screen appears.
3Press the trigger.
a The Handheld software loads. b The Home screen appears.
If pressing the reset button did not work…
1Insert a memory card (with 3M Handheld software on it) into the handheld.
2 Remove the battery for approximately five minutes.
Reset Button
702_012
3 Insert a fully charged battery. | Figure 6: Handheld reset button. |
|
4Follow the Using the Handheld Device for the first time procedure on page 9.
12