Formatting a memory card
If the Handheld displays database error messages when you insert the memory card, try reformatting the memory card.
If this procedure does not work, call 3M Service. (See Requesting service on page 18.)
No Database
No database found on
Memory card.
Insert a memory card with a Valid database.
OK
DLA_053
Invalid Database
Invalid database found on memory card.
Export data to memory card again.
OK
DLA_061
Using Windows to format the memory card
1
2Right click on the
The Format dialog box appears.
Leave the other settings at their default state.
3In the File System list box, select FAT.
4Click Start.
5After formatting is complete, use your system software to export information to the memory card.
6Insert the memory card into the Handheld.
If the Handheld reads the memory card, the formatting was successful.
If the Handheld displays “No Database” or “Invalid Database” messages, call 3M Service. See Requesting service on page 18 for phone numbers.
Figure 7: If the Handheld displays database error messages when you insert the memory card, try reformatting the memory card.
13
