3M 78-0013-4441-1-D installation instructions 3M One Pass Mini Fiber Pathway, December

Models: 78-0013-4441-1-D

1 12

Page 1

December 2012	3
78-0013-4441-1-D

Image 1

Contents

3M One Pass Mini Fiber Pathway Installation InstructionsDecember 78-0013-4441-1-DContents 3M One Pass Mini Fiber Pathway3.0 Installation Tools 2.0 Components and Accessories1.0 System Overview 3M One Pass Mini Fiber PathwayWall Surface Compatibility Test Procedure 4.0 Wall Surface Compatibility3M One Pass Mini Fiber Pathway c Splicer’s Knife3M One Pass Mini Fiber Pathway 5.0 Routing the Duct6.0 Exposing Fiber For Termination 7.0 Wall Outlet Installation3M One Pass Mini Fiber Pathway 9.0 Exterior and Interior Corner Installation 8.0 Duct Installation3M One Pass Mini Fiber Pathway Note Do not overstretch duct3M One Pass Mini Fiber Pathway 10.0 Planar Corner Installation12.0 Bridge Strip Installation 11.0 Mechanical Anchor Installation13.0 Wall Cover Installation 3M One Pass Mini Fiber Pathway3M One Pass Mini Fiber Pathway 14.0 Connector Termination and Final Steps3M One Pass Mini Fiber Pathway 15.0 Fiber RepairNote Additional window cuts at other corners may be made if needed ~1 ~25 mm3M One Pass Mini Fiber Pathway Warranty Limited Remedy Limited Liability3M and ScotchBlue are trademarks of 3M Company Important Notice Communication Markets Division