7.3After exposing appropriate length of fiber for termination, attach duct by aligning the end of the duct with the recessed area in the base. Remove the liner and press firmly into place.
DO NOT ROUTE the 900 µm fiber into the outlet box until installation of the duct and termination of the connector is complete.
Align end of duct in recess
8.0Duct Installation
8.1Installation Tool
Reference surface guides |
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Belt clip | |
|
|
| Duct profile wheels |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No duct on these wheels
8.2Installing the duct
Straight away from wall
Firm pressure
Remove liner as you go
•The reference surface guides should maintain contact with reference surface during installation
•Hold duct at same height as duct installation path
•Hold duct out approximately
•Do not overstretch duct during installation
•Use firm pressure to securely attach duct to installation surface
3M™ One Pass Mini Fiber Pathway
9.0Exterior and Interior Corner Installation
9.1Exterior Corner: Install duct around corner using
firm pressure.
Note: Do not overstretch duct.
9.2a) Interior corner: Use wheel of installation tool to ensure proper bend radius.
Note: Do not overstretch duct or allow adhesive to make contact with the next wall until the corner is complete!
Do not let adhesive touch wall
Use wheel of installation tool to ensure proper bend radius
b)Traverse corner with tool and continue duct application.
7 |