System Setup
Mouse Connection
The general cable links the projector to the proper mouse adapter cable for your computer.
General cable
1. Attach the male
2.Attach the female
the end of the proper mouse adapter cable for your | Female | Male |
|
| |
computer (serial, PS/2 or ADB cable). Line up the |
|
|
arrows on the sides of the plugs before attaching. Be |
|
|
sure not to bend or break the small metal pins inside the |
|
|
plugs. |
|
|
3.Attach the other end of the mouse adapter cable to the proper port on your computer (serial, PS/2 or ADB).
Apple™ Desktop Mouse
The Macintosh operating system should recognize the MP7630B/MP7730B as a mouse without any drivers being loaded.
VirtualMouse for PC Computer
For IBM™ compatible computers, set the operating systems to Serial Mouse or PS/2 Mouse to recognize projec- tor as the mouse pointer device.
To set mouse driver information:
a)Windows™ 95/Windows™ 98/Windows™ NT
1.Select Start/Settings/Control Panel.
2.Select Add New Hardware.
3.“Windows will now search for any PnP devices...” Click Next.
4.Hardware Types: Scroll down to Mouse. Click Mouse.
5.Select Manufacturer: Standard Mouse Type
6.Select Model: Standard Serial Mouse
7.Click Next, Finish, Start.
8.Restart Windows if prompted.
b)Windows™ 3.1
From Program Manager
1.Click Main
2.Click Windows Setup (make note of the current mouse driver)
3.Click Options
4.Then Change Systems Settings
5.Choose Mouse
6.It should be listed as Microsoft or IBM PS/2
✓Note: For proper mouse operation, always turn the projector power on first and power up the computer.
For some laptop computers, you may need to disable the internal pointing device (IPD). This is done through the BIOS level
© 3M IPC 2001 | 3M™ Personal Projector MP7630B/MP7730B |
15
