Manuals / 3M / Computer Equipment / Projector

3M MP8640 Connection to the Control Signal Terminal, a. Mouse emulation, PS/2 mouse, ADB mouse

Models: MP8640

1 28

Download 28 pages 35.6 Kb

Page 21

5.3 Connection to the Control Signal Terminal

5.3 Connection to the Control Signal Terminal

a.Mouse emulation

(1)While the projector and computer are turned OFF, connect the projector and the mouse terminal of computer using an appropriate cable. (PS/2, Serial or ADB)

(2)Turn ON the projector.

(3)Turn ON the computer.

(4)Select the correct mouse driver for the application. See computer's User Manual for this procedure.

Note: In some Notebook computers which have internal pointing device, mouse emulation will not work unless the internal pointing device is disabled. In this case, disable the internal pointing device in BIOS setting. Check the computer's manual for procedure to follow to disable internal pointing device in BIOS setting.

Caution: Turn off the power to both the projector and computer before connecting.

Connect the computer to the control terminal of the projector using the appropriate cable.

PS/2 mouse

PS/2 port

D-sub 15pin (Female)

ADB mouse

ADB port

D-sub 15pin (Female)

© 3M 1997

3M™ Multimedia Projector MP8640

21

Image 21

3M MP8640 manual Connection to the Control Signal Terminal, a. Mouse emulation, PS/2 mouse, ADB mouse

Contents

Operators Guide MP8640 Multimedia ProjectorTable of Contents IMPORTANT SAFEGUARDS SafeguardsINTENDED USE SAVE THESE INSTRUCTIONSLIMITED WARRANTY WarrantyTHANK YOU FOR CHOOSING 3M LIMITATION OF LIABILITY1.2 Optional Accessories 1.1 Contents of Shipping BoxSection 1 Unpack 1.3 Keep Your Packaging MaterialsSection 2 Product Description 2.1 Machine Characteristics2.2 Main Unit Identification 2.3 System Set Up - connecting various equipment How to insert batteries 1. Remove the battery compartment cover 2.4 Remote Control Transmitter Identification2. Insert the batteries as illustrated inside the battery compartment 3. Replace the coverSection 3 Basic Operations 3.1 InstallationAdjust the screen size using the ZOOM button Turn the MAIN POWER switch of the projector onAdjust the focus using the FOCUS button source of the signal to be projected on the screen3.3 Turn Off the Power Turn the MAIN POWER switch of the projector offHold the STANDBY/ON button for 3-5 seconds Close the lens shutter2 Select the menu to be adjusted using the MENU buttons or Section 4 Adjustment and FunctionsSTICK SWITCH To return to the factory default setting4.2 How To Use Foot Adjusters Front viewSide view 4.3 SETUP TINT cannot be adjusted with a PAL video signal inputTINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input 4.5 IMAGE 4.4 INPUTThe menu INPUT is used to select the input source The IMAGE menu is used to alter the imageMIRROR 4.5 IMAGE continuedSelects reveal speed. Note For XGA inputs, REVEAL does not work DISP. SIZEThe OPT. menu allows you to control communication function 4.6 OPT5.1 Connection to the Video Signal Terminal Section 5 Connection to Signal Terminals5.2 Connection to the RGB Signal Terminal a. Input signalc. Example of computer signal a. Mouse emulation 5.3 Connection to the Control Signal TerminalPS/2 mouse ADB mouseb. RS 232 Control Cable not included with basic packout 5.3 Connection to the Control Signal Terminal continuedSerial mouse 3M Multimedia Projector MP8640Section 6 Maintenance 6.1 Cleaning the Air Filter6.2 Message Table 6.3 Lamp Display Lamp Operation HoursReplacing the Lamp Symptom 6.4 When You Think Something Is WrongSolution CauseSection 7 Technical Specifications Specifications7.2 Accessories 3M Multimedia Projector MP8640 7.3 Dimension Diagram3M Canada 3M Austin Center3M Mexico, S.A. de C.V 3M Europe