3M PX5 E-17, Unplug the power cable 2 Turn the projector upside-down, Remove the lamp cover

Replacing the Lamp Cartridge

Preparations: Turning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched makes it easier to replace the lamp cartridge. Turn the projector right-side up after replacing the lamp cartridge.

1 Unplug the power cable.

2 Turn the projector upside-down.

3 Remove the lamp cover.

(1)Turn the lamp cover’s set screw counterclock- wise and loosen until the screw turns freely. (The screw does not come off.)

(2)Open the lamp cover a little, then pull it in the direction of the arrow and remove it.

1

3 2

4 Remove the lamp cartridge.

(1)Fully loosen the lamp cartridge’s two screws. (The screws do not come off.)

(2)Grasp the lamp cartridge’s handle and pull upward to remove the lamp cartridge.

E-17