3M PX5 user manual Important Safeguards, Installation, Power Supply

Models: PX5

1 95
Download 95 pages 13.78 Kb
Page 3
Image 3
Important Safeguards

IMPORTANT SAFETY INFORMATION

InstallationCAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED 3M™ SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit.

This symbol alerts the user that important literature concerning the operation and mainte- nance of this unit has been included.Therefore, it should be read carefully in order to avoid ony problems.

The above cautions are given on the bottom of the product.

Hg: Lamp in This Product Contains Mercury. Dispose of Lamp According to Local, State or Federal Law.

WARNING

TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED 3M SERVICE PERSONNEL.

Important Safeguards

These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them carefully and heed all warnings.

Installation

For best results, use the unit in a darkened room.

Place the unit on a flat, level surface in a dry area away from dust and moisture.

Do not place the unit in direct sunlight, near heaters or heat radiating appliances.

Exposure to direct sunlight, smoke or steam can harm internal components.

Handle the unit carefully. Dropping or jarring can damage internal components.

Do not place heavy objects on top of the unit.

Power Supply

The unit is designed to operate on a power supply of 100-240 V 50/60 Hz AC. Ensure that your power supply fits these requirements before attempting to use the unit.

Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire.

Disconnect the power cable (main’s lead) from the power outlet after using the unit.

Before disconnecting the power cable, make sure that the STANDBY indicator lights in amber (not blinking or in green).

E-3

Page 3
Image 3
3M PX5 user manual Important Safeguards, Installation, Power Supply