3M X35N Using the automatic adjustment feature, Adjusting the position, For a computer signal

3M™ Digital Projector X30N/X35N

Operating

Using the automatic adjustment feature

1.	Press AUTO button on the remote control.	AUTO button
	Pressing this button performs the following.

For a computer signal

The vertical position, the horizontal position and the horizontal phase will be automatically adjusted.

Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.

MY SOURCE/ STANDBY/ON

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE PAGE UP	VOLUME
	PAGE
	DOWN
KEYSTONE	MY BUTTON	MUTE

POSITIONMENU

 For a video signal and s-video signal The video format best suited for the respective input signal will be selected automatically. This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu (33). The vertical position and horizontal position will be automatically set to the default.

For a component video signal

The vertical position, horizontal position and horizontal phase will be automatically set to the default.

●The automatic adjustment operation requires approx. 10 seconds. Also please note that it may not function correctly with some input.

●When this function is performed for a video signal, a certain extra such as a line may appear outside a picture.

●When this function is performed for a computer signal, a black frame may be displayed on the edge of the screen, depending on the PC model.

●The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (46).

Adjusting the position

1. Press POSITION button on the remote control when no menu is indicated.

The “POSITION” indication will appear on the screen.

2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position. When you want to reset the operation, press RESET button on the remote control during the operation.

To complete this operation, press POSITION button again. The dialog will automatically disappear after a few seconds.

KEYSTONE MY BUTTON MUTE

POSITIONMENU

ENTER

ESCRESET

POSITION button

●When this function is performed on a video signal, s-video signal or component video signal, some image such as an extra-line may appear at outside of the picture.

●When this function is performed on a video signal, s-video signal or component video signal, the range of this adjustment depends on OVER SCAN in IMAGE menu (30) setting. It is not possible to adjust when OVER SCAN is set to 10.

●If POSITION button is pressed when a menu is indicated on screen, the displayed picture does not move its position but the menu does.

20 © 3M 2009. All Rights Reserved.