AUTO OFF

3M™ Digital Projector X30N/X35N

OPTION menu

Item

Description

 

Using the ▲/▼ buttons adjusts the time to count down to

 

automatically turn the projector off.

 

Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)

AUTO OFF

When the time is set to 0, the projector is not turned off automatically.

When the time is set to 1 to 99, and when the passed time with no-

 

signal or an unsuitable signal reaches at the set time, the projector

 

lamp will be turned off.

 

If one of the projector's buttons or the remote control buttons

 

is pressed or one of the commands (except get commands) is

 

transmitted to the CONTROL port during the corresponding time,

 

projector will not be turned off.

 

Please refer to the section “Turning off the power” (15).

 

The lamp time is the usage time of the lamp, counted after the last

 

resetting. It is shown in the OPTION menu.

 

Pressing the RESET button on the remote control or the ► button

 

of the projector displays a dialog.

LAMP TIME

To reset the lamp time, select the OK using the ► button.

CANCEL OK

 

Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

For the lamp replacement, see the section "Replacing the lamp"

(62, 63).

 

The filter time is the usage time of the air filter, counted after the last

 

resetting. It is shown in the OPTION menu.

 

Pressing the RESET button on the remote control or the ► button

 

of the projector displays a dialog.

FILTER TIME

To reset the filter time, select the OK using the ► button.

CANCEL OK

 

 

• Please reset the filter time only when you have cleaned or replaced

 

the air filter, for a suitable indication about the air filter.

 

• For the air filter cleaning, see the section “Cleaning and replacing

 

the air filter” (64, 65).

(continued on next page)

44

© 3M 2009. All Rights Reserved.

Page 44
Image 44
3M warranty 3M Digital Projector X30N/X35N, Item, Description, Auto Off, Lamp Time, 62, Filter Time