IMAGE menu

3M™ Digital Projector X30N/X35N

IMAGE menu

IMAGEManual backgroundManual background menu

From the IMAGE menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item

Description

 

 

 

Using the ▲/▼ buttons switches the mode for aspect ratio.

 

For a computer signal

 

NORMAL ó 4:3 ó 16:9 ó 16:10

ASPECT

For a video signal, s-video signal or component video signal

4:3 ó 16:9 ó 14:9

 

 

For no signal

 

4:3 (fixed)

 

• The NORMAL mode keeps the original aspect ratio of the signal.

 

Using the ◄/► buttons adjusts the over-scan ratio.

 

Small (It magnifies picture) ó Large (It reduces picture)

OVER SCAN

• This item can be selected only for a video, s-video and component

video signal.

 

 

• When this adjustment is too large, certain degradation may appear

 

at the frame area of the picture. In such a case, please adjust small.

 

Using the ◄/► buttons adjusts the vertical position.

 

Down ó Up

 

Over-adjusting the vertical position may cause noise to appear on

 

the screen. If this occurs, please reset the vertical position to the

V POSITION

default setting. Pressing the RESET button when the V POSITION

is selected will reset the V POSITION to the default setting.

 

 

• When this function is performed on a video signal, s-video signal,

 

or component video signal, the range of this adjustment depends

 

on OVER SCAN (above) setting. It is not possible to adjust when

 

OVER SCAN is set to 10.

 

Using the ◄/► buttons adjusts the horizontal position.

 

Left ó Right

 

Over-adjusting the horizontal position may cause noise to appear on

 

the screen. If this occurs, please reset the horizontal position to the

H POSITION

default setting. Pressing the RESET button when the H POSITION is

selected will reset the H POSITION to the default setting.

 

 

• When this function is performed on a video signal, s-video signal,

 

or component video signal, the range of this adjustment depends

 

on OVER SCAN (above) setting. It is not possible to adjust when

 

OVER SCAN is set to 10.

(continued on next page)

30

© 3M 2009. All Rights Reserved.

Page 30
Image 30
3M warranty IMAGEmenu, 3M Digital Projector X30N/X35N