3M™ Digital Projector X30N/X35N
NETWORK menu
Item | Description |
|
|
| (1) Use the ▲/▼ buttons on the |
| NETWORK menu to select the |
| PROJECTOR NAME and press |
| the ► button. The PROJECTOR |
| NAME dialog will be displayed. |
| (2) The current PROJECTOR NAME will be displayed on the first 3 |
| lines. If not yet written, the lines will be blank. |
| Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to |
| select and enter characters. |
| To erase 1 character at one time, press the RESET button or |
| press the ◄ and INPUT button at the same time. Also if you |
| move the cursor to DELETE or ALL CLEAR on screen and |
| push the ENTER or INPUT button, 1 character or all characters |
| will be erased.The PROJECTOR NAME can be input up to 64 |
PROJECTOR | characters. |
NAME | (3) To change an already inserted |
| character, press the ▲/▼ button |
| to move the cursor to one of the |
| first 3 lines, and use the ◄/► |
| buttons to move the cursor on the |
| character to be changed. After |
| pressing the ENTER or INPUT |
| button, the character is selected. |
| Then, follow the same procedure |
| as described at the item (2) above. |
| (4) To finish entering text, move the cursor to the OK on screen and |
| press the ►, ENTER or INPUT button. To revert to the previous |
| PROJECTOR NAME without saving changes, move the cursor |
| to the CANCEL on screen and press the ◄, ENTER or INPUT |
| button. |
(continued on next page)
© 3M 2009. All Rights Reserved. | 53 |
