3M X62w manual Utilize Web Remote Control

Models: X62w

1 84
Download 84 pages 28.27 Kb
Page 42
Image 42
2.6 Utilize Web Remote Control

2. Equipment connection and network setting

2.6 Utilize Web Remote Control

You can use your Web browser to remote control the projector once the projector is properly configured and connected to your PC via the wireless LAN card or via wired LAN.

NOTE • Do not attempt to control the projector with the projector's remote control and via your Web browser at the same time. Attempt to do so may causes a projector operational error.

Open browser when it is possible to communicate with projector. Corresponding browser is Internet Explorer 5.5 or later.

Specify http://(projector IP address)/ to start.

For example, http://192.168.1.10/

(Input this URL when IP address is not changed.)

After start up, enter your ID and password, and click [Logon]. Following window appears as shown in fig. 2.6.a.

Fig. 2.6.a Utility selection window for Web Remote Control

42

Page 42
Image 42
3M X62w manual Utilize Web Remote Control