3. How to use Projector software – Basics -
3.How to use Projector software – Basics -
3.1 How to use “MIU Live Viewer”
This section explains how to use the “MIU Live Viewer”.
3.1.1. Install “MIU Live Viewer”
In order to use the projector with a PC for Live Mode, you will first need to install the accompanying software on all the PCs you will be using.
Minimum PC Hardware and Software Requirements
• OS: | Windows 2000 Professional Service Pack4, |
| Windows XP Home Edition/Professional |
•Graphic Interface: DirectX 6.1a or higher; Video RAM 4MB or higher (8MB recommended)
• CPU: | Pentium III (600MHz or higher recommended) |
• Display: | VGA 640x480 or higher (XGA 1024x768 recommended) 65,536 |
| simultaneous colors or higher |
NOTE • Set your PC’s resolution to XGA or less.
•In some cases, Screen will not be displayed correctly like no displays larger than XGA portion.
•Images might not been transmitted, caused by OS version or the driver software for Network Adaptor.
It is highly recommended that OS and the driver should be updated to the latest.
• Memory: | 64MB or higher (128MB or higher if using Windows XP) |
• Available Hard Disk Space: 10MB or higher | |
• Web browser: | Internet Explorer® (5.5 or higher) |
•
•PC with PC card slot (PCMCIA
NOTE • Not required for PCs with
•Depending on the type of wireless LAN card and PC you are using, the projector may not be able to communicate properly with your PC, even if the PC you are using is equipped with
44