3M X62w manual Ssid

2. Equipment connection and network setting

2.5 Configuring and controlling the projector via a web browser (Continued)

2.5.2 Network Settings (Continued)

Item

Description

Wireless Mode	Select "AD-HOC" or "Infrastructure".
	Select using channel between "1" and "11".
CH	NOTE • Depending on the country where you are
	the channels may vary. In addition, depending on the
(Communication
	country or region where you are may be required to use
channel)
	a wireless LAN card that confirm to the standards in the
	respective country or region.
Speed	Select communication speed.
(Communication speed)
Encryption	Select data encryption method.
	Input WEP key, which has same length defined by WEP.
WEP Key	When "64bit" or "128bit" is selected, input 10 characters or
	26 characters respectively. Only numbers from "0" to "9" and
	alphabets from "a" to "f" can be used.
	Input WPA Passphrase. Available number of input characters
WPA Passphrase	is 8 to 63. Only alphabets, numbers and following symbols
	can be used.
	!"#$%&'()*+,-./[¥]^_`{}~
	Set SSID. Maximum number of input characters is 32. Only
SSID	alphabets, numbers and following symbols can be used.
	!"#$%&'()*+,-./[¥]^_`{}~

Click the [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

24