2.Equipment connection and network setting
2.Equipment connection and network setting
2.1 Required equipment preparation
Followings are required for 1 projector and 1 PC connection. Multiple PC connection is described in section 4.1.
Projector: 1 unit
PC: 1 set (“MIU Live Viewer” installation is required for “MIU Live Viewer” usage.) IEEE802.g wireless LAN equipment is required.
Depending on the type of wireless LAN card and PC you are using, the projector may not be able to communicate properly with your PC, even if the PC you are using is equipped with
LAN cable (in case of wired connection): 1 piece * 1
SD Wireless Network Card (in case of wireless connection): 1 unit * 2
Memory card (in case of
*1: When a projector and a PC are connected, use
*2: Access point is required when wireless LAN connection is used as Infrastructure mode.
2.2Network connection using
This section explains how to connect network using
*This function cannot be used when multiple PCs or multiple projectors are connected.
*The system of Windows2000 Professional Service Pack 4 or Windows XP and the administrator authority are required to use
*This function might not work depending on your used wireless LAN driver.
If so, setup the connection manually. ( 10, 16 and refer to the User Manuals for your PC and wireless equipment.)
[Wired LAN connection]
1)When projector network settings such as IP address and subnet mask are changed, need to return to the projector factory default Network settings. qPress the menu button on remote control or the ▲/◄/►/▼ button on keypad.
Then OSD menu will be displayed. If Easy Menu is displayed, change the menu to Advanced menu.
8