A&D UC-324NFC Installing or Replacing the Batteries, Measuring Your Weight on a Carpet

Installing (or Replacing) the Batteries

Caution

Insert each battery with its positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment. Improper installation of the batteries may cause battery leakage.

Replace all four batteries with new ones, when the symbol is displayed. Do not mix new and used batteries. It may cause damage to the scale or shorten the battery life.

The symbol does not appear when the batteries are completely drained. The battery life is dependant upon the environmental temperature, battery type and usage.

Remove the batteries from the battery compartment, when the scale is not to be used for a long time. They may leak and damage the scale.

The batteries provided with the scale are for trial only and may have a short life.

Steps for Installing (or Replacing) Batteries

1. Open the battery compartment cover on the underside of the scale.

2. Install four new batteries with the positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment.

3. Close the battery compartment cover.

Measuring Your Weight on a Carpet

Place the scale on a solid level surface, such as tile, wood, or laminate flooring. If the scale must be used on a carpet, be sure to attach the plastic add-on feet.

Steps for Attaching the Add-on Feet

1. Each add-on foot has two pins. Match those pins to the holes on the scale leg and insert firmly.

2. Attach add-on feet on all four legs.

Add-on foot Scale leg

Notes

Please be careful not to fall when using the add-on feet.

We recommend using this scale on a solid and level surface.

4