a/d/s/ PH30.2 manual System configurations

system configurations

All a/d/s/ PowerPlates™ provide extensive features, which make a variety of system configurations possible. It is not feasible to cover all of the possibilities within the few pages of this manual. There are a few system configurations, however, which are extremely popular when used alone or as a "building block" of a larger more elaborate system. Please review systems 1 through 6 described below for suggestions on how to configure the most popular combinations. Larger systems may be built from a combination of the simpler building blocks as shown in systems 7.

button is disengaged	control is non-operational
button is engaged	control is operational

System 1 - PH30.2 used in 6-channel mode. Channels 1 and 2 are used for front high-pass speakers, channels 3 and 4 are used for rear high-pass speakers and channels 5 and 6 are used to drive a stereo pair of subwoofers. Although shown as a 4-channel input, the source unit can be either 2 or 4 channel depending on the setting of the 2/4 channel switch.

Note: Optional AC502 can be used in this system to adjust the level of the subwoofers.

front left satellite

front right satellite

70A

subwoofer

subwoofer

rear right satellite

rear left satellite

5