ADTRAN 624, 612, 616, 606, 604 system manual System Config Management Snmp Management Traps

Section 4 User Interface Guide Total Access 600 Series System Manual

PRIVILEGE

The access for this manager can be assigned three levels. The factory default is NONE.

NONE	No access is allowed for this community or manager.
GET	Manager can only read items.
GET/SET	Manager can read and set items.

MANAGER IP

This may be used in conjunction with the Netmask field to define a range of manager IPs. A netmask of 255.255.255.255 defines a single IP as the manager host IP. A MANAGER IP defined as 192.22.1.0 with a NETMASK of 255.255.255.0 allows all managers on the 192.22.1.0 network access to the SNMP information. The default value is 0.0.0.0.

NETMASK

The mask is used to determine which bits of the MANAGER IP are significant. A "0" bit means "don't care." A "1" bit means that the corresponding address bits in the incoming SNMP packet must match the address bit in the defined MANAGER IP. The netmask of 255.255.255.255 defines a single IP as the manager host IP. A MANAGER IP defined as 192.22.1.0 with a NETMASK of 255.255.255.0 allows all managers on the 192.22.1.0 network access to the SNMP information. The default value is 0.0.0.0.

SYSTEM CONFIG > MANAGEMENT > SNMP MANAGEMENT > TRAPS

Sets up the trap manager name and IP from this menu.

#

Displays the index number in the SNMP traps table. This list allows up to 20 managers to be listed to receive traps.

MANAGER NAME

The text string describing the name of the entry. It is intended for easy reference and has no bearing on the SNMP trap function. You can enter up to 31 characters in this field. The factory default is no entry in the MANAGER NAME field.

MANAGER IP

This is the IP address of the manager that is to receive the traps. The factory default is 0.0.0.0.

SYSTEM CONFIG > MANAGEMENT > FDL MANAGEMENT

Enables the FDL management and configures mode and IP addresses from this menu.

56 © 2004 ADTRAN, Inc. 61200624L1-1B