ADTRAN 604, 616, 606 system manual 61200624L1-1B ADTRAN, Inc 157

Total Access 600 Series System Manual		Section 4 User Interface Guide
	DS0 Mapping Instructions
	Step	Action

1From the main menu, select DS0 MAPS.

Verify that the ACTIVE MAP is set to either MAP 1 or MAP 2. This is the map that is actively running on the unit. The unit has the ability to store two maps.

2• To edit the current map, press <ENTER> on EDIT/VIEW MAP 1 to view the map. (If Map 1 is the Active Map)

•To edit the standby map, press <ENTER> on EDIT/VIEW MAP 2 to view the map. (If Map 2 is the Active Map)

The DS0 listed on the left side of the menu corresponds to DS0s (1 through 24) on the network T1 interface. At least one DS0 must be mapped to the ROUTER to utilize the Total Access 6XX for routing purposes.

3Scroll down to the DS0 that will be mapped. (Any DS0 can be mapped to the router.)

4Set the SERVICE for the DS0 that you are mapping to TA IAD.

5Set the PORT of the DS0 that you are mapping to ROUTER 64K or ROUTER 56K.

6Map all the DS0s as desired, and exit this menu by pressing the left arrow button. Your changes will automatically save when exiting the map.

7Make sure the ACTIVE MAP is set to the correct map (the map you want running) before exiting the DS0 MAPS menu.

8Left arrow back to the main menu.

61200624L1-1B © 2004 ADTRAN, Inc. 157