ADTRAN 604 Last filter to combination, Logically and this filter with the next filter in the list

Total Access 600 Series System Manual Section 4 User Interface Guide

NEXT OPER

The next operation to use to combine with the next filter in the list (default is END).

END	the last filter to combination.
AND	logically AND this filter with the next filter in the list.
OR	logically OR this filter with the next filter in the list.

HIT COUNT

Displays the number of packets that have matched the criteria for the defined filter.

OUTGOING

The packets transmitted out the interface can be filtered in three ways:

DISABLE (DEF) Turns off packet outputs filtering. No outgoing packets are blocked.

BLOCK ALL All outgoing packets from the interface are blocked except as defined in the SECURITY > FILTERS > INTERFACES > SETUP > OUT EXCEPTIONS list.

FORWARD ALL All outgoing packets from the interface are not blocked except as defined in the

SECURITY > FILTERS > INTERFACES > INTERFACES > SETUP > OUT EXCEPTIONS

list.

OUT EXCEPTIONS

Define exceptions to the forward/block all rules established using the OUTGOING field. The

Total Access 6XX allows for a list of up to 32 filter entries which are performed in the order they appear on the list.

#

Indicates the entry number in the In Exceptions table.

ACTIVE

Turns this entry active when set to YES. Default is NO.

TYPE

Selects the filter define list to reference (default is MAC):

MAC	from the SECURITY > FILTERS > FILTER DEFINES > MAC FILTER DEFINES list.
PATTERN	from the SECURITY > FILTERS > FILTER DEFINES > PATTER FILTER DEFINES
	list.
IP	from the SECURITY > FILTERS > FILTER DEFINES > IP FILTER DEFINES list.

61200624L1-1B © 2004 ADTRAN, Inc. 147