Section 5 DLP-12

Total Access 600 Series System Manual

 

 

Perform the following steps in the order listed.

1.Connect to the Total Access 6XX using the CRAFT (RJ-48) interface.

If you are not already connected to the unit’s rear CRAFT interface, either with a VT100 compatible terminal or with a PC running VT100 emulation software, follow the procedure in DLP-1,Connecting a VT100 Terminal or PC to the CRAFT Port. Connecting to the rear CRAFT interface limits the configuration transfer procedure to XMODEM only.

2.Log in to the unit using the read-write password (see DLP-2,Logging in to the System, for details).

3.Go to the SYSTEM UTILITY menu and select CONFIGURATION TRANSFER menu; press <Enter>

4.Set the TRANSFER METHOD menu to XMODEM.

5.Select LOAD AND USE CONFIG to start the transfer. Enter Y to confirm the transfer and prepare the Total Access 6XX for the transfer download.

When the Total Access 6XX is ready to receive the XMODEM configuration file, the menu screen clears and displays AWAITING XMODEM UPLOAD....<CTRL+X> TWICE TO CANCEL. If this does not appear, please review the preceding steps above for possible configuration errors.

6.From the terminal emulation software, begin the XMODEM transfer by using the appropriate command sequence. For Windows HyperTerminal, select TRANSFER>SEND FILE. Enter the filename (including path) and select XMODEM as the transfer method. Total Access 6XX configuration files should have a

.cfg extension.

If necessary, refer to the terminal emulation software documentation for help.

Because XMODEM data is being transferred inband through the menu interface, the VT100 menus of the Total Access 6XX will be inoperable during this procedure from the CRAFT interface. You can cancel the update at any time within the terminal emulation software. (Please consult the documentation provided by the terminal emulation software to determine how to do this.)

7.View CURRENT TRANSFER STATUS to verify the progress of the current upload.

216

© 2004 ADTRAN, Inc.

61200624L1-1B

Page 218
Image 218
ADTRAN 624, 612, 616, 606, 604 system manual DLP-12 Total Access 600 Series System Manual