ADTRAN 624, 612, 616, 606, 604 system manual DLP-10 Loading a Configuration Using Tftp

DLP-10 Loading a Configuration Using TFTP

Introduction

The Total Access 6XX supports configuration uploads from a unit (via the 10/100BASET Ethernet port) to a TFTP server located on the network. This DLP provides the steps to follow for a successful configuration upload using the 10/100BASET Ethernet port and a TFTP Server.

Tools and Materials Required

•A PC with a Telnet client software

•A TFTP Server accessible on the local network (A TFTP server is provided with the unit as part of the ADTRAN Utilities software.)

To prevent electrical shock, do not install equipment in a wet location or during a lightning storm.

Electronic equipment can be damaged by static electrical discharge. Before handling modules, put on an antistatic discharge wrist strap to prevent damage to electronic components. Place equipment in antistatic packing material when transporting or storing. When working on equipment, always place it on an approved antistatic mat that is electrically grounded.

61200624L1-1B © 2004 ADTRAN, Inc. 211