ADTRAN 604, 612, 616, 606, 624 system manual Router Options Ethernet Interface Step Action

Total Access 600 Series System Manual Section 4 User Interface Guide

3. Setting the Router Options

For more details on the configuration parameters discussed in this section, refer to the following pages:

Router Ethernet Interface Configuration menus beginning on page 119

Router Network Interface Configuration menus beginning on page 122

Router Default Gateway menus beginning on page 128

Router Options – Ethernet Interface

Step Action

1From the main menu, select ROUTER and press <ENTER>.

2Use the right arrow key to highlight CONFIG and press <ENTER>.

3Select INTERFACES and press <ENTER>. Use the right arrow key to highlight the SETUP field for the ETH (Ethernet) interface and press <ENTER>.

4Highlight the PRIMARY IP field and press <ENTER>.

5Set the IP ADDRESS of the Ethernet port.

6Set the SUBNET MASK for the Ethernet port.

By default, RIP is disabled on the Ethernet interface. If RIP needs to be enabled, highlight the RIP field and press <ENTER>. Set the appropriate

7VERSION, RIP METHOD, DIRECTION, and V2 SECRET (where applicable) to configure RIP on the interface. For more details, refer to Router > Config > Interfaces (ETH) > Sub-Interfaceon page 120.

8Press the left arrow key to return to the Ethernet sub-interface menu (displays

PRIMARY IP and SECONDARY IP).

If your application requires additional secondary IP address, highlight the

SECONDARY IP field and press <ENTER>. The Total Access 6XX supports up to

95 additional LAN segments. Enter each additional secondary IP address and corresponding subnet mask. To add a new IP address entry, highlight the NUM field and press the <I> key. To delete an existing entry, highlight the NUM field for the entry to delete and press the <D> key.

10Left arrow back to the main menu to save the changes.

Router Options – T1 Interface (L2 Protocol = ATM)

Step Action

1From the main menu, select ROUTER and press <ENTER>.

2Use the right arrow key to highlight CONFIG and press <ENTER>.

61200624L1-1B © 2004 ADTRAN, Inc. 177