Total Access 600 Series System Manual

Section 4 User Interface Guide

 

 

INTERFACES (NETWORK SHDSL)

View the network SHDSL interface status and configure SHDSL parameters from this menu. These menus are only applicable to SHDSL Total Access 600 Series systems.

INTERFACES (SHDSL) > CONFIG

Configure the various SHDSL parameters.

INTERFACES (SHDSL) > CONFIG > NTU/LTU MODE

Choices are NTU (Network Terminating Unit) or LTU (Line Terminating Unit). Select NTU when the unit is connected to the SHDSL network device. Select LTU when the unit is expected to function as the SHDSL network device. In back-to-back applications, one unit must be set to NTU and the other for LTU.

INTERFACES (SHDSL) > CONFIG > ANNEX = A/B

Configures the G.shdsl signaling method as either ANNEX A or ANNEX B. Total Access 600 Series units also support an auto detection signaling method (ANNEX A&B) which allows the unit to detect the signaling method on the link and signal accordingly.

INTERFACES (SHDSL) > CONFIG > ITU-T/GSPAN V1.2

Configures the G.shdsl signaling as either standard ITU-Tor GLOBESPAN V1.2.

INTERFACES (SHDSL) > CONFIG > RADSL (AUTO/FIXED)

Configures the SHDSL interface to be either variable rate speeds (AUTO) or a fixed rate (FIXED). If the system is configured for a fixed rate, the link will only train at the specified rate. The DSLAM setting must match the configured rate when using fixed rates.

INTERFACES (SHDSL) > STATUS

Displays the SHDSL interface status including configuration modes and data rates.

INTERFACES (SHDSL) > STATUS > TRAINING STATE

Indicates the current training state for the SHDSL interface as either trained, currently training, etc.

INTERFACES (SHDSL) > STATUS > NTU/LTU MODE

Displays the current configured mode of operation on the SHDSL link as either NTU or LTU.

INTERFACES (SHDSL) > STATUS > DATA RATE

Displays the negotiated data rate on the SHDSL link.

INTERFACES (SHDSL) > STATUS > FRAME MODE

Displays the framing of the SHDSL link as either framed or unframed.

61200624L1-1B

© 2004 ADTRAN, Inc.

75

Page 77
Image 77
ADTRAN 606 Interfaces Shdsl Config NTU/LTU Mode, Interfaces Shdsl Config ITU-T/GSPAN, Interfaces Shdsl Status NTU/LTU Mode