ADTRAN 616, 612, 606, 624, 604 system manual Craft Port, PIN Name Description

Total Access 600 Series System Manual			Section 2 Engineering Guidelines
		Table 6. NTWK Connection Pinout
	PIN	NAME	DESCRIPTION
	1	RX RING	Receive data from the network
	2	RX TIP	Receive data from the network
	3, 6-8	—–––––	Unused
	4	TX RING	Transmit data toward the network
	5	TX TIP	Transmit data toward the network

CRAFT Port

The CRAFT port (EIA-232) on the rear panel connects to a computer or modem and provides the following functions:

•Accepts EIA-232 input from a PC or a modem for controlling the Total Access 600 Series.

•Baud rate is user-configurable.

•Acts as input for either VT100 or PC control.

•Acts as an interface for flash memory software downloads using XMODEM.

Table 7 shows the CRAFT port pinout.

		Table 7. CRAFT Pinout
PIN	NAME	DESCRIPTION
1	GND	Ground – connected to unit chassis
2	RTS	Request to send – flow control
3	RXDATA	Receive data
4	DTR	Data terminal ready
5	TXDATA	Transmit data
6	CD	Carrier detect
7	—–––––	Unused
8	CTS	Clear to send - flow control

A DB-9 to RJ-48 adapter is needed to connect a PC or VT100 terminal to the CRAFT port. This adapter is not part of the Total Access 600 Series shipment. You may obtain a free adapter (P/N 3196ADPT001) by contacting ADTRAN Technical Support or by adding the adapter to the system order. You can also build your own adapter by purchasing unassembled adapter kits from Black Box or Datacomm Warehouse (or other equivalent companies). The adapter pinout is shown in Table 8.

		Table 8. DB-9 to RJ-48 Adapter Pinout
DB-9	RJ-48		DESCRIPTION
2	5		Transmit Data
3	3		Receive Data
5	1		Ground

61200624L1-1B © 2004 ADTRAN, Inc. 31