ADTRAN 612, 616, 606, 624, 604 Security Radius Server Server, Security Radius Server UDP Port

Section 4 User Interface Guide Total Access 600 Series System Manual

FILTER LIST NAME

Selects between filters defines in the list. Default is no entry in filter list name.

NEXT OPER

The next operation to use to combine with the next filter in the list (default is END):

END	the last filter to combination.
AND	logically AND this filter with the next filter in the list.
OR	logically OR this filter with the next filter in the list.

HIT COUNT

Displays the number of packets that have matched the criteria for the defined filter.

SECURITY > RADIUS SERVER

The parameters for the RADIUS SERVER are configured in this menu.

Telnet radius is only available in A.04 firmware or later.

SECURITY > RADIUS SERVER > SERVER 1

This is the IP address of the first RADIUS SERVER that the unit should attempt to communicate with when authenticating a Telnet session. Default is 0.0.0.0.

SECURITY > RADIUS SERVER > SERVER 2

This is the IP address of the second RADIUS SERVER that the unit should attempt to communicate with when the primary server does not respond. Default is 0.0.0.0.

SECURITY > RADIUS SERVER > SERVER 3

This is the IP address of the third RADIUS SERVER that the unit should attempt to communicate with when the primary server does not respond. Default is 0.0.0.0.

SECURITY > RADIUS SERVER > UDP PORT

This is the UDP port the unit should use when communicating with the RADIUS SERVER. The default is 1812, which the commonly used port.

SECURITY > RADIUS SERVER > SECRET

The RADIUS SERVER and unit share this text string. It is used by the RADIUS SERVER to authenticate the unit, the RADIUS client. The factory default is not to use a secret.

148 © 2004 ADTRAN, Inc. 61200624L1-1B