ADTRAN 604, 612, 616, 606, 624 Indicates the entry number in the MAC Filter Defines table

Section 4 User Interface Guide Total Access 600 Series System Manual

SECURITY > FILTERS > FILTER DEFINES

The unit can filter packets based on certain parameters within the packet. The method used by the unit allows the highest flexibility for defining filters and assigning them to a PVC or PPP link. The filters are set up in two steps: (1) defining the filter types, and (2) applying them to an interface. This menu is used to define the individual filter defines based on packet type.

The Filter Defines option applies to both Frame Relay and PPP operation.

SECURITY > FILTERS > FILTER DEFINES > MAC FILTER DEFINES

The MAC filter is applied to bridge packets only. Bridge packets which are forwarded by the bridge functionality of the unit are defined here. Up to 32 MAC defines can be specified.

NUM

Indicates the entry number in the MAC Filter Defines table.

NAME

Identifies the filter entry. Default is no entry in NAME field.

FILTER TYPE

Specifies a NORMAL or DEBUG filter. When a NORMAL filer is applied to an interface, traffic is blocked or forwarded according to the filter. When a DEBUG filter is applied, packets that match the filter are documented without affecting traffic flow. (Use the DEBUG filter with the Syslog or Terminal Mode logging to view the packet contents.)

SRC ADDR

48-bit MAC source address used for comparison. Values are in hexadecimal format. Default is 00:00:00:00:00:00.

SRC MASK

Bits in the MAC source address which are compared. Values are in hexadecimal format. Default is 00:00:00:00:00:00.

DEST ADDR

48-bit MAC destination address used for comparison. Values are in hexadecimal format. Default is 00:00:00:00:00:00.

DEST MASK

Bits in the MAC destination address used for comparison. Values are in hexadecimal format. Default is 00:00:00:00:00:00.

142 © 2004 ADTRAN, Inc. 61200624L1-1B