Total Access 600 Series System Manual

Section 4 User Interface Guide

 

 

TYPE

16-bit type field used for comparison. Values are in hexadecimal format. Default is 00:00.

TYPE MASK

Bits in the type field used for comparison. Values are in hexadecimal format. Default is 00:00.

SECURITY > FILTERS > FILTER DEFINES > PATTERN FILTER DEFINES

The pattern filter is applied to bridge packets only. That is any packet which is forwarded by the bridge functionality of the unit. Up to 32 pattern defines can be specified.

NUM

Indicates the entry number in the Pattern Filter Defines table.

NAME

Identifies the filter entry. Default is no entry in NAME field.

FILTER TYPE

Specifies a NORMAL or DEBUG filter. When a NORMAL filer is applied to an interface, traffic is blocked or forwarded according to the filter. When a DEBUG filter is applied, packets that match the filter are documented without affecting traffic flow. (Use the DEBUG filter with the Syslog or Terminal Mode logging to view the packet contents.)

OFFSET

Offset from beginning of packet of where to start the pattern comparison. Default is 0.

PATTERN

64 bits used for comparison. Values are in hexadecimal format. Default is 00:00:00:00:00:00:00:00.

MASK

Bits in the pattern to be compared. Values are in hexadecimal format. Default is 00:00:00:00:00:00:00:00.

SECURITY > FILTERS > FILTER DEFINES > IP FILTER DEFINES

The IP filter defines apply to any IP packet, whether it is routed or bridged. Up to 32 IP defines can be specified.

NUM

Indicates the entry number in the IP Filter Defines table.

61200624L1-1B

© 2004 ADTRAN, Inc.

143

Page 144 Page 146
Page 145
Image 145
ADTRAN 612 Indicates the entry number in the IP Filter Defines table, Security Filters Filter Defines IP Filter Defines
Page 144 Page 146
Top Page Image Contents