ADTRAN 624 Private IP address of the active translation, Server IP address of the public device

Section 4 User Interface Guide Total Access 600 Series System Manual

TRANSLATE BODY

If set to YES, the application payload in the packet is scanned for occurrences of the private/public IP address in binary or ASCII form. Set this to NO for applications where scanning payload data is undesirable.

NAT VIEW

Provides the user a dynamic view of current active router translations. Once the router has translated an inbound or outbound packet, the translation appears in this table. The main view is a listing of all the translations performed thus far. In order to see the detailed view of one of the entries, select the entry index number and press <ENTER>. The NAT View parameters are as follows:

PRIVATE ADDRESS

Private IP address of the active translation.

PUBLIC ADDRESS

Public IP address of the active translation.

SERVER ADDRESS

Server IP address of the public device.

PROTOCOL

Type of protocol active on the translation.

PRIVATE PORT

Private port number used for the translation.

SPOOFED PORT

Spoofed port number for the translation. The Total Access 6XX often needs to use the spoofed ports to determine which private device to translate the packet to. This would be necessary if multiple applications using the same private port were occurring simultaneously.

SERVER PORT

Port number used by the server (public device).

TOTAL TIME UNUSED

Time the translation has been unused, in seconds.

126 © 2004 ADTRAN, Inc. 61200624L1-1B