ADTRAN 616, 606, 604 system manual 61200624L1-1B ADTRAN, Inc 173

Total Access 600 Series System Manual Section 4 User Interface Guide

Layer 2 Protocol Configuration – T1 Interface (Continued)

Select SETUP, and from the SETUP menu, enter the Gateway type under CALL

CONTROL and enter the VPI and VCI values for communicating with that

8Gateway.

For this application, CALL CONTROL and virtual identifier (VPI and VCI) values should be set appropriately for your network.

To verify correct setup, use the PVC STATUS menu (under the STATUS menu located at L2 PROTOCOL [0] > STATUS) to look at the current status of the voice

9connection.

Under STATUS, view information about the voice PVC along with information about the POTS ports available on the unit.

61200624L1-1B © 2004 ADTRAN, Inc. 173